This fabulous interface is in like new condition and includes the locking AC adapter.
Key Features
- Desktop 2x6 Thunderbolt audio interface with world-class 24-bit/192 kHz audio conversion
- Realtime UAD Processing for tracking through vintage Compressors, EQs, Tape Machines,
Mic Preamps, and Guitar Amp plug-ins with near-zero (sub-2ms) latency - Thunderbolt connection for blazing-fast PCIe speed and rock-solid performance on
modern Macs - Unison™ technology offers stunning models of classic tube and transformer-based
mic preamps - Two premium mic/line preamps; Two line outputs; front-panel Hi-Z instrument input
and headphones output - Two digitally controlled analog monitor outputs for full resolution at all listening levels
- Up to eight channels of additional digital input via Optical connection
- Uncompromising analog design, superior components, and premium build quality
- Runs UAD Powered Plug-Ins via Audio Units, VST, RTAS & AAX64 in all major DAWs
Audio Interface
- Sample rates up to 192 kHz* at 24-bit word length
- Up to 10 x 6 simultaneous input/output channels
- Two channels of analog-to-digital conversion via:
- Two balanced mic/line inputs
- One Hi-Z instrument input
- Six channels of digital-to-analog conversion via:
- Digitally-controlled stereo monitor outputs
- Stereo headphone outputs
- Line outputs 3-4
- Up to eight channels of digital inputs via:
- Eight channels ADAT optical with S/MUX for high sample rates, or
- Two channels S/PDIF optical with sample rate conversion
- Two channels of analog-to-digital conversion via:
- 64-bit device drivers
- PCIe audio drivers
Microphone Preamplifiers
- Two high-resolution, ultra-transparent, digitally-controlled analog mic preamps
- Front panel and software control of all preamp parameters
- Low cut filter, 48V phantom power, 20 dB pad, polarity inversion, and stereo linking
Monitoring
- Digitally-controlled analog monitor outputs maintains highest fidelity
- Independently-addressable stereo headphone outputs
- Independently-addressable line outputs 3-4 can be used for additional cue mix
- Front panel control of monitor levels and muting
UAD-2 Inside
- One (SOLO) SHARC DSP processors
- Realtime UAD Processing on all analog and digital inputs
- Same features and functionality as other UAD-2 devices when used with DAW
- Includes UAD Powered Plug-Ins “Realtime Analog Classics” bundle
- Complete UAD Powered Plug-Ins library is available online
Software
Console application:
- Enables tracking and/or monitoring with Realtime UAD Processing
- Remote control of Apollo Twin features and functionality
- Virtual I/O for routing DAW tracks through Console
- Two independent stereo Auxiliary busses
Console Recall plug-in:
- Saves Apollo Twin configurations inside DAW sessions for easy recall
- Facilitates control of Apollo Twin monitoring features from within the DAW
- VST, RTAS, AAX 64, and Audio Units plug-in formats
UAD Meter & Control Panel application:
- Configures global UAD settings and monitors system usage
Other
- Attractive and durable desktop form factor
- Locking power supply prevents accidental disconnection
- Easily updateable firmware
- One year warranty includes parts and labor
Apollo Twin. System Requirements.
Thunderbolt Systems
UAD Powered Plug-Ins version 8
- Apple Mac computer with available Thunderbolt or Thunderbolt 2 port
- Mac OS X 10.8.5 Mountain Lion, 10.9.x Mavericks, or 10.10.x Yosemite
- 4 gigabytes available disk space
- Internet connection to download software and authorize UAD plug-ins
- Compatible VST, Audio Units, RTAS, or AAX 64 plug-in host DAW software
- Thunderbolt cable (sold separately)
Apollo Twin. Specifications.
All audio specifications are typical performance unless otherwise noted, tested under the following conditions: 48 kHz internal sample rate, 24-bit sample depth, 20 kHz measurement bandwidth, with balanced inputs and outputs.
System
- I/O Complement
- Microphone Inputs Two
- Analog Line Inputs Two
- Hi-Z Instrument Inputs One
- Analog Line Outputs Two (independent mix buses)
- Analog Monitor Outputs Two (one stereo pair, independent L/R mix buses)
- Headphone Outputs One stereo pair (independent L/R mix buses)
- Digital Input Port (TOSLINK optical) One (ADAT or S/PDIF, selectable)
- Thunderbolt Port One (Thunderbolt 2 compatible)
- A/D – D/A Conversion
- Supported Sample Rates (kHz) 44.1, 48, 88.2, 96, 176.4, 192
- Bit Depth Per Sample 24
- Simultaneous A/D conversion Two channels
- Simultaneous D/A conversion Six channels
- Analog Round-Trip Latency 1.1 milliseconds @ 96 kHz sample rate
- Analog Round-Trip Latency with up to four serial UAD Powered Plug-Ins via Console application1.1 milliseconds @ 96 kHz sample rate
Analog I/O
- Line Inputs 1 & 2
- Jack Type (combo mic/line balanced inputs) Female ¼” TRS Balanced
- Dynamic Range (A–weighting) 117.5 dB
- Signal-to-Noise Ratio (A–weighting) 117.5 dB
- Total Harmonic Distortion + Noise –108 dBFS
- Common-Mode Rejection Ratio (CMRR) Greater than 60 dB (10’ cable)
- Frequency Response 20 Hz – 20 kHz, ±0.1 dB
- Input Impedance 10K Ohms
- Gain Range +10 dB to +65 dB
- Maximum Input Level (@ Minimum Gain)18 dBV
- Maximum Input Level (@ Maximum Gain) –37 dBV
- Stereo Level Balance ±0.05 dB
- Microphone Inputs 1 & 2
- Jack Type (combo mic/line balanced inputs) Female XLR Balanced (pin 2 positive)
- Phantom Power (switchable per input) +48V
- Dynamic Range (A–weighting) 118 dB
- Signal-to-Noise Ratio (A–weighting) 118 dB
- Total Harmonic Distortion + Noise –110 dBFS
- Equivalent Input Noise –127 dB
- Frequency Response 20 Hz – 20 kHz, ±0.1 dB
- Common-Mode Rejection Ratio (CMRR) Greater than 70 dB (10’ cable)
- Default Input Impedance 5.4K Ohms (variable via Unison preamp model)
- Gain Range +10 dB to +65 dB
- Pad Attenuation (switchable per input) 20 dB (variable via Unison preamp model)
- Maximum Input Level (@ Minimum Gain, with Pad) 23.8 dBV
- Maximum Input Level (@ Maximum Gain, with Pad) –31.2 dBV
- Hi-Z Input
- Jack Type Female ¼” TS Unbalanced
- Dynamic Range (A–weighting) 117 dB
- Signal-to-Noise Ratio (A–weighting) 117 dB
- Total Harmonic Distortion + Noise –101 dBFS
- Frequency Response 20 Hz – 20 kHz, ±0.1 dB
- Input Impedance 1M Ohms
- Maximum Input Level (@ Minimum Gain) 10 dBV
- Maximum Input Level (@ Maximum Gain) –45 dBV
- Line Outputs 3 & 4
- Jack Type ¼” Female TRS Balanced
- Dynamic Range (A–weighting) 118 dB
- Signal-to-Noise Ratio (A–weighting) 118 dB
- Total Harmonic Distortion + Noise –107 dBFS
- Frequency Response 20 Hz – 20 kHz, ±0.1 dB
- Stereo Level Balance ±0.05 dB
- Channel Separation Greater than 120 dB
- Output Impedance 600 Ohms
- Maximum Output Level 18 dBV
- Monitor Outputs 1 & 2
- Jack Type ¼” Female TRS Balanced
- Frequency Response 20 Hz – 20 kHz, ±0.1 dB
- Dynamic Range (A–weighting) 115 dB
- Signal-to-Noise Ratio (A–weighting) 115 dB
- Total Harmonic Distortion + Noise –105 dBFS
- Channel Separation Greater than 118 dB
- Stereo Level Balance ±0.05 dB
- Output Impedance 600 Ohms
- Output Gain Range –96 dB to 0 dB
- Maximum Output Level 18 dBV
- Operating Reference Level +14 dBu, +20 dBu (selectable)
- Stereo Headphones Output
- Jack Type ¼” Female TRS Stereo (unbalanced)
- Frequency Response 20 Hz – 20 kHz, ±0.1 dB
- Dynamic Range (A–weighting) 113 dB
- Signal-to-Noise Ratio (A–weighting) 113 dB
- Channel Separation Greater than 110 dB
- Total Harmonic Distortion + Noise –101 dBFS
- Stereo Level Balance ±0.11 dB
- Output Impedance 10 Ohms
- Output Gain Range –INF to 0 dB
- Maximum Output Power 80 milliwatts into 600 Ohms
Digital I/O
- S/PDIF
- Connector Type Optical TOSLINK JIS F05 (shared with ADAT)
- Format IEC958
- Supported Sample Rates (kHz) 44.1, 48, 88.2, 96
- S/PDIF Input Channels Two (Stereo L/R)
- ADAT
- Connector Type Optical TOSLINK JIS F05 (shared with S/PDIF)
- Format ADAT Digital Lightpipe with S/MUX
- Supported Sample Rates (kHz) 44.1, 48, 88.2, 96, 172.4, 192
- ADAT Input Channels @ 44.1 kHz, 48 kHz 1 – 8
- ADAT Input Channels @ 88.2 kHz, 96 kHz 1 – 4 (S/MUX)
- ADAT Input Channels @ 176.4 kHz, 192 kHz 1 – 2 (S/MUX)
- Clock Synchronization Sources
- Internal, S/PDIF, ADAT (digital clock sync source conditional per selected digital input type)
Electrical
- Power Supply External AC to DC
- AC Connector Type Changable blades (UL, VDE, UK, SSA, CCC)
- AC Requirements 100V – 240V AC, 50 – 60 Hz
- DC Connector Type Male plug, 2.1 mm x 5.5 mm, center positive
- DC Requirements 12 VDC, ±5%
- Maximum Power Consumption 12 Watts
Environmental
- Operating Temperature Range 32º to 95º Farenheit (0º to 35º Celcius)
- Storage Temperature Range –40º to 176º Farenheit (–40 to 80º Celcius)
- Operating Humidity Range 20% to 80%
Mechanical
- Dimensions
- Width 6.31”
- Height 2.60”
- Depth, Chassis Only 5.86”
- Depth, Including Knob & Jack Protrusions 6.20”
- Shipping Box (Length x Width x Height) 8” x 8” x 5.5” (20.32cm x 20.32cm x 13.97cm)
- Weight
- Shipping Weight (with box & accessories) 3.85 pounds
- Weight (bare unit) 2.35 pounds
- Package Contents
- Apollo Twin Unit (SOLO or DUO)
- External Power Supply with (4) changeable AC connectors supporting USA, Europe, UK, Australia, China
- URL Card